Tannoy Wall Hanging Speaker

Tannoy Wall Hanging Speaker

Model no  :  Di 8DC

Availability  :   In Stock

Frequency Range 62Hz - 45kHz, Driver Complement - 1 x 200mm (8.00") Constend directrivity Dual Concentric, Crossover - Passive 1.7kHz with dynamic HF protection, Power Handling 130 W, Prgramme 260W, Peak 520W, Finish Textured Blac, Dimension (HxWxD) 394x294x215mm, Weight 9.5 kg

Download Brochure  Add to Enquiry

Ask For Price



Di8 DC/ Di8 DCt
Frequency Response (-3dB) (1) 65Hz - 30kHz
Frequency Range (-10dB) (1) 53Hz - 35kHz
System Sensitivity (1W @1m) (2) 91dB (1W = 2.83V for 8 Ohms)
Nominal Coverage Angle 90 degrees conical
Driver Complement

Dual Concentric™ constant directivity driver Low Frequency: 200mm (8.00") resin treated multi fibre paper pulp cone
High Frequency: 25mm (1.00") titanium dome with neodymium magnet system

Crossover 1.5kHz - 2nd order LF
2nd order HF (with dynamic HF protection)
Directivity Factor (Q) 5.5 averaged 1kHz to 10kHz
Directivity Index (DI) 7 averaged 1kHz to 10kHz
Rated Maximum SPL Average: 111dB
Peak: 117dB
Power Handling (3) Average: 90W
Programme: 180W
Peak: 360W
Recommended Amplifier Power 180W @ 8 Ohms
Nominal Impedance 8 Ohms
Di8 DCt only - Transformer Taps (top rotary switch) 70V: 60W / 30W / 15W / 7.5W / OFF &
Low Impedance operation
100V: 60W / 30W / 15W / OFF &
Low Impedance operation
Enclosure High Impact Polystyrene (HIPS)
rated IP64 to EN60529 (IEC529)
Grille Steel, with weather resistant coating
Finish Textured black or white paint
(custom trim colours can be supplied pre-fitted to special order - minimum order quantity applies)
Connectors Euroblock type removable locking connector with screw terminals with "loop through" facility
Fittings 1 x K-Ball™ Bracket socket
2 x M8 yoke bracket inserts
Yoke bracket
Pole mount adaptor
K-Ball™ pre-wired multi angle bracket
Dimensions 404.3 x 260 x 260.3mm
(15.92 x 10.24 x 10.25”)
NET Weight 7.0kg
Notes: (1) Average over stated Bandwidth. Measured in an IEC baffle in an Anechoic Chamber (2) Unweighted Pink noise input, measured at 1m on axis (3) Long term power handling capacity as defined in EIA - 426B test


Copyright © Savi Vision Pvt. Ltd. All Rights Reserved.

Site Designed & Developed By Blue Moon Technologies